EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Products
- »
- Silicone Sealant Suppliers
Silicone Sealant Suppliers
Providing you the best range of wacker gn glazing neutral silicone sealant, wacker gp general purpose silicone sealant, wacker wn weatherseal neutral silicone sealant and wacker hs hybrid crystal clear silicone sealant with effective & timely delivery.
Wacker GN Glazing Neutral Silicone Sealant
Product Price: Rs 324 / PieceGet Best Price
Minimum Order Quantity: 100 Piece
Product Brochure
Product Details:
| Model | Wacker GN |
| Brand | Wacker |
| Model Number | GN |
| Packaging Type | Bottle |
| Applications | Construction, Jointing, Gap Filling |
| Ultimate Elongation | 487 % |
| Skin Forming Time | 30 min |
| Extrusion Rate At 6 Bar | 504 g/min |
| Hardness Shore A | 24 |
| Tensile Strength S2-Dumbbell | 1,2 N/mm2 |
| Density | 0,98 g/cm3 |
| Movement Capability | 20 % |
| Modulus | 0,6 N/mm2 |
| Cure Type | Oxime and Unfilled |
| Tensile Strength Joint | 0,43 N/mm2 |
| Consistency | Non-Sag |
- Wacker GN - General Neutral transp. is a one-part, neutral silicone sealant with outstanding adhesion to most building substrates. It further exhibits good weather resistance and workability for glazing. Properties Wacker ® GN - General Neutral transp. cures at room temperature in the presence of atmospheric moisture to give a permanent flexible silicone rubber
- Special features - long shelf life - non-sag - readily gunnable both at low (+5 °C) and high (+40 °C) temperatures - good tooling properties - excellent weatherability - excellent adhesion - excellent durability - non-corrosive to metals - suitable for alkaline substrates such as concrete, mortar, fibrous cement
- Application - Sealant for internal connection and expansion joints - Suitable for fenestration and glazing applications Adhesion Wacker ® GN - General Neutral transp. exhibits excellent primerless adhesion to most non-porous siliceous materials (e.g. glass, tiles, ceramics, enamel, glazed tiles); metals (e.g. aluminum, steel, zinc or copper); impregnated, varnished or painted wood; and some plastics. Users must carry out own tests due to the great variety of substrates. The adhesion can be improved in many cases by pretreatment of the substrate with a primer.
- Processing The substrate areas that will be in contact with the sealant must be clean, dry and free of all loose material such as dust, dirt, rust, oil and other contaminants. Non-porous substrates should be cleaned with a solvent and clean, lint-free, cotton cloth. Remove residual solvent before it evaporates with a fresh clean, dry cloth. For application from cartridges cut thread open, fix nozzle on top and cut to required bead size. The sealant can be applied in beads or layers. It requires moisture in order to cure. The curing time can take longer at lower temperatures, lower humidity or by low volume of air exchange. Restrictions on use Wacker ® GN - General Neutral transp. is not recommended for sealing of aquarium or for long term use under water. WACKER® 121 - AQUARIUM has been specifically developed for aquarium applications. Wacker® GN - General Neutral transp. is not suitable for food grade applications where the joints are likely to come in contact with food. For this application please use Wacker® 120 – Food Contact Wacker® GN - General Neutral transp. is not suitable for the following plastic substrates such as
- Safety notes Comprehensive instructions are given in the corresponding Material Safety Data Sheets.
- They are available on request from Wackersubsidiaries or may be printed via Wackerweb site . During vulcanization methylethylketoxime is released. These vapors should not be inhaled for long periods or in high concentration. Hence, good ventilation of the work place is necessary. Should uncured silicone rubber come into contact with eyes or mucous membranes, the affected area must be rinsed thoroughly with water as irritation will otherwise be caused. Avoid prolonged contact of uncured sealant with the skin - use a dry cloth or paper to remove it. Keep out of reach of children. Cured silicone rubber, however, can be handled without any risk to health.
- Storage The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
- UPVC concrete metal various general applications
- German technology
Get Best QuoteRequest A Callback
Wacker GP General Purpose Silicone Sealant
Product Price: Rs 300 / BottleGet Best Price
Minimum Order Quantity: 100 Bottle
Product Brochure
Product Details:
| Packaging Size | 280 ml |
| Brand | Wacker |
| Model Number | GP |
| Packaging Type | Bottle |
| Density | 0,97 g/cm3 |
| Extrusion Rate At 6 Bar | 800 g/min |
| Storage | Cool and Dry Place |
| Consistency | Non-Sag |
| Skin Forming Time | 25 min |
| Hardness Shore A | A |
| Ultimate Elongation (Joint) | 150 % |
| Tensile strength (S2-Dumbbell) | 1,22 % |
| Ultimate Elongation (S2-Dumbbell) | 520 % |
| Cure Type | Acetoxy |
| Modulus At 100 % (S2-Dumbbell) | 0,29 N/mm2 |
| Modulus At 100 % (Joint) | 0,36 N/mm2 |
| Tensile Strength (Joint) | 0,5 N/mm2 |
- Product description Wacker ® GP – General Purpose is a one-part, acetoxy silicone sealant for many applications
- Properties Wacker® GP – General Purpose cures at room temperature in the presence of atmospheric moisture to give a permanent flexible silicone rubber.
- Application - Sealant for a variety of DIY applications - Suitable for many general industrial sealing and bonding uses Adhesion Wacker® GP – General Purpose exhibits excellent primerless adhesion to most non-porous siliceous materials (e.g. glass, tiles, ceramics, enamel, glazed tiles); impregnated, varnished or painted wood and some plastics. Users must carry out own tests due to the great variety of substrates. The adhesion can be improved in many cases by pretreatment of the substrate with a primer.
- Processing The substrate areas that will be in contact with the sealant must be clean, dry and free of all loose material such as dust, dirt, rust, oil and other contaminants. Non-porous substrates should be cleaned with a solvent and clean, lint-free, cotton cloth. Remove residual solvent before it evaporates with a fresh clean, dry cloth. For application from cartridges cut thread open, fix nozzle on top and cut to required bead size. The sealant can be applied in beads or layers. It requires moisture in order to cure. The curing time can take longer at lower temperatures, lower humidity or by low volume of air exchange. Restrictions on use Wacker® GP – General Purpose should not be used on substrates such as marble, concrete, fibrous cement and mortar, as the product releases acetic acid during curing. In this case use a neutral grade such as Wacker® Wn - Weatherseal Neutral Or Wacker® 460 - Natural Stone. Wacker® Gp – General Purpose should not be used in contact with metals such as lead, copper, brass or zinc due to corrosion. WACKER® GP – GENERAL PURPOSE may be discolored in contact with some organic elastomers, e.g. EPDM and neoprene. Wacker® GP – General Purpose is not suitable
- Special features -
- long shelf life -
- non-sag -
- ready gunnability at low (+ 5 °C) and high (+ 40 °C) temperatures
- Rapid crosslinking: quickly becomes tack-free and crack resistant
- Flexible at low (- 40 °C) and high temperatures (+ 100 °C) following cure
- Adheres excellently to glass, vitrified surfaces, ceramic tiles, many plastics and most paints
- Packaging Wacker ® GP – General Purpose is usually supplied in standard size cartridges that fit all standard caulking guns. Safety notes Comprehensive instructions are given in the corresponding Material Safety Data Sheets. They are available on request from Wacker subsidiaries or may be printed via Wacker web site . During vulcanization acetic acid is released. These vapors should not be inhaled for long periods or in high concentration. Hence, good ventilation of the work place is necessary. Should uncured silicone rubber come into contact with eyes or mucous membranes, the affected area must be rinsed thoroughly with water as irritation will otherwise be caused. Avoid prolonged contact of uncured sealant with the skin - use a dry cloth or paper to remove it. Keep out of reach of children. Cured silicone rubber, however, can be handled without any risk to health.
- German technology
- Ready to use
- Long shelf life. see top
- Short tack free time
- Good weatherability
- Service temperature 40 degree celcius
Get Best QuoteRequest A Callback
Wacker WN Weatherseal Neutral Silicone Sealant
Product Price: Rs 180 / BottleGet Best Price
Minimum Order Quantity: 100 Bottle
Product Brochure
Product Details:
| Packaging Size | 280ml |
| Brand | Wacker |
| Model Number | WN |
| Packaging Type | Bottle |
| Hardness | 30 Shore A |
| Extrusion Rate | 250 ml/min |
| Density | 1,38 + 0,02 g/cm3 |
| Cure Rate | 2 mm/day |
| Movement Capability | +/-20 % |
| Elongation At Break | 500% |
| Tear Strength | 4,5 N/mm |
| Skin Forming Time | 10 min |
- Wacker WN - Weatherseal Neutral is a one-component, neutral-curing, high modulus silicone sealant with outstanding adhesion and weather resistance, long shelf life and excellent tooling characteristics for construction, glass and window building. Wacker?? WN - Weatherseal Neutral cures at room temperature in the presence of atmospheric moisture to give a permanent flexible silicone rubber
- Properties.100% silicone. excellent weatherability . excellent tooling characteristics for professional use . non-corrosive to metals .suitable for alkaline substrates such as concrete, mortar, fibrous cement . matt finish . excellent adhesion on most substrates without primer . solvent-free, thus featuring low volume shrinkage during vulcanization.ready gunnability at low (+ 5 ??C) and high (+ 50 ??C) temperatures. flexible at low (-40 ??C) and high temperatures (+150 ??C). non-sag
- Applications :Weatherseal & Fire retardancy
- Application details Application fields
- Sealing of connection and expansion joints in the building industry
- Sealing of perimeter joints
- Sealing of joints between glazing and supporting structures (frames, transoms, mullions) Processing The substrate areas that will be in contact with the sealant must be clean, dry and free of all loose material, dust, dirt, rust, oil and other contaminants. Non-porous substrates should be cleaned with a solvent and a clean, lint-free, cotton cloth. Remove residual solvent before it evaporates with a fresh clean, dry cloth. For application from cartridges cut thread open, fix nozzle on top and cut to required bead size. The sealant can be applied in beads or layers. It requires moisture in order to cure. The curing time can take longer at lower temperatures, lower humidity or by low volume of air exchange. It is the responsibility of the user to test the compatibility of the sealant with the adjoining materials. Incompatible substances like coating materials (paints, varnishes and glazes) or organic plasticizer containing rubbers (EPDM, butyl and neoprene) can lead to discoloration or other impairments like loss of adhesion of the sealant. Materials in direct contact with the applied sealant like cleaning agents and materials in indirect contact like gaseous emissions can damage the sealant in its function or change its appearance. Because of the multitude of these materials, Wacker cannot make a general statement to the compatibility of materials with the sealant. In case of doubt the user shall conduct appropriate preliminary tests. The use of tooling agents should be avoided if possible. Otherwise, water or a diluted solution of a little neutral soap or alcohol in water should be sparingly applied.
- Certification Wacker?? WN - Weatherseal Neutral is certified and classified according to
- ISO 11600 F/G, Class 25HM
- ASTM C920, Class 25
- EN 13501-2, E 180-H-X-F-W4-25
- EN 13501-2, EI 180-H-X-F-W4-25
- EN 13501-2, E 180-V-X-F-W4-25
- EN 13501-2, EI 180-V-X-F-W4-25 Adhesion Wacker?? WN - Weatherseal Neutral exhibits excellent primerless adhesion to many substrates, e.g. glass, tiles, ceramics, enamel, glazed tiles and clinker e.g. aluminium, steel, zinc or copper wood, and many plastics. Users must carry out their own tests due to the great variety of substances. The adhesion can be improved in many cases by pretreatment of the substrates with a primer. If adhesion difficulties arise please contact our technical service.
- Packaging and storage Packaging Wacker?? WN - Weatherseal Neutral is usually supplied in standard size cartridges that fit all standard caulking guns. Additionally it is available in convenient sausages. Storage The 'Best use before end' date of each batch is shown on the product label.
Get Best QuoteRequest A Callback
Wacker HS Hybrid Crystal Clear Silicone Sealant
Product Price: Rs 400 / PieceGet Best Price
Minimum Order Quantity: 100 Piece
Product Brochure
Product Details:
| Packaging Size | 280ml |
| Brand | Wacker |
| Model Number | HS |
| Packaging Type | Bottle |
| Surface Of Application | Wood, Metal, Plastic |
| Hardness Shore A | 35 |
| Tensile strength (joint) | 2,2 N/mm2 |
| Skin forming time at 23 DegreeC / 50 % r.h. | 40 min |
| Modulus at 100 % (joint) | 0,7 N/mm2 |
| Cure Type | Hybrid |
| Density at 23 DegreeC | 1,4 g/cm3 |
| Ultimate elongation (joint) | 600% |
| Consistency | Non Sag |
- Connection joints that are subsequently painted
- Fixation where flexibility of the sealant is still required
- Sealing joints between a wide variety of materials, such as wood, glass, metals, plastics and mineral-based substrates
- Stress-relieving bonding and fixation
- Colors
- White
- Gray
- Black
Get Best QuoteRequest A Callback